PREDATOR Bird away repeller
PREDATOR Bird away repeller, ultrasound and flashing light
Out of stock
Predator has an advanced PIR to monitor a three-dimensional area of 70 degrees and a distance of 12 meters, providing an area of approx. 85m2 free area. When intruding animals are detected, the device will be activated, which will simultaneously emit a flashing strobe light and a continuously variable sound frequency of 17000 Hz-24000 Hz. The unwanted birds entering the detected area will be scared away by the device’s flashing strobe light plus ultrasound. The PIR senses the birds’ body heat and is then activated.
PREDATOR can be used anywhere without electricity as it can also be operated on 2 pcs. 9V alkaline batteries (batteries not included). The unit remains in a dormant standby mode when no movement is detected, which saves the batteries and extends intervals between battery changes. The unit is equipped with a DC input that can be used when batteries are not enough if there is strong activity of unwelcome birds. Transformer is included in this model.
Carefully remove the main module from the mounting bracket. The main module slides out.
Slide the battery compartment cover on the back of the main module and install two new 9V alkaline batteries.
For use with a transformer, connect the adapter to a 230V electrical outlet.
Replace the main module by pushing it into the mounting cover. Hang the unit at 1 to 2.5 meters above the ground.
Avoid obstacles within the unit’s work area.
Turn the power switch to the “ON” position. After heating for 30 seconds, you can see a flashing light with an audible sound. You can press the function key to move the inaudible sound to audible sound to repel birds according to your needs. Leave the unit on around the clock.
It is also recommended that you experiment with different locations to find the most effective position to install the device.
During battery operation, if the flashing light does not illuminate within the protected zone, it is time to replace the batteries.
- Dimensions: 110 x 100 x 95 mm
- Weight: 255 g
- Voltage: Transformer 220-240V / 9V DC or 2 x 9V batteries (not included)
- Power: Stand by: 0.16mA
- Frequency: 17,000 Hz-24,000 Hz (random and continuously variable)
- Cover area: Up to 85m2, and 12m range